Dolphin Duct Canvas Coating 30-36 Anti-Fungal

DOLPHIN 30-36 AF is a flexible adhesive and coating, forming a durable seal against air leakage. It can be used where the humidity level had to be sustained at or above 90%.


- Protective indoor lag coating
- Finish for insulation materials in combination with reinforcing fabric (e.g. canvas cloth on air conditioning ducts) and cold water piping.
- Allows the application on Polystyrene or Polyurethane foam
- Application to the joint or edges of fibrous duct liner insulation to seal and prevent air erosion.

Application instruction

The surface should be clean, dry and free from oil, grease and loose particles. Apply a tack coat of DOLPHIN 30-36 AF at 3 to 3.5 m2 per liter. After applying tack coat immediately imbed the selected lagging fabric smoothly in to the wet coating. Apply two finish coat of DOLPHIN 30-36 AF at rate of 4 to 5 m2 per liter. It is very important to ensure that each coat of DOLPHIN 30-36 AF totally cured before the next coat is applied. The dry film thickness will vary with fabric selected.

Storage and Shelf life

Store under cover, protect from direct sunlight and high temperature (>35ºC). Shelf life is up to 12 months in unopened container when stored as directed. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.


Application Video

DOLPHIN 30-36 AF is available in 25 kg air tight plastic pail and 4 kg plastic bucket.

Newsletter Signup

Product Search


Enquiry Form